Passing Standard I/O Through a Pipe¶

A very simple example, passing standard input through a pipe and receiving the results in a file looks like this:

import pipes
import tempfile

# Establish a very simple pipeline using stdio
p = pipes.Template()
p.append('cat -', '--')
p.debug(True)

# Pass some text through the pipeline,
# saving the output to a temporary file.
t = tempfile.NamedTemporaryFile(mode='r')
f = p.open(t.name, 'w')
try:
    f.write('Some text')
finally:
    f.close()

# Rewind and read the text written
# to the temporary file
t.seek(0)
print t.read()
t.close()

The pipeline Template is created and then a single command, cat - is added. The command reads standard input and writes it to standard output, without modification. The second argument to append() encodes the input and output sources for the command in two characters (input, then output). Using - means the command uses standard I/O. Using f means the command needs to read from a file (as may be the case with an image processing pipeline).

The debug() method toggles debugging output on and off. When debugging is enabled, the commands being run are printed and the shell is given set -x so it runs verbosely.

After the pipeline is set up, a NamedTemporaryFile is created to give the pipeline somewhere to write its output. A file must always be specified as argument to open(), whether reading or writing.

$ python pipes_simple_write.py
+ cat -
cat - >/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpUQitsj
Some text

Reading from a pipeline works basically the same way, with a few changes to the arguments. For our example, we need to set up the contents of the input file before opening the pipline. Then we can pass that filename as input to open().

import pipes
import tempfile

# Establish a very simple pipeline using stdio
p = pipes.Template()
p.append('cat -', '--')
p.debug(True)

# Establish an input file
t = tempfile.NamedTemporaryFile(mode='w')
t.write('Some text')
t.flush()

# Pass some text through the pipeline,
# saving the output to a temporary file.
f = p.open(t.name, 'r')
try:
    contents = f.read()
finally:
    f.close()

print contents

We can read the results from the pipeline directly.

$ python pipes_simple_read.py
+ cat -
cat - </var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmppvwyXu
Some text

Using Files Instead of Streams¶

Some commands need to work on files on the filesystem instead of input streams. Commands that process a large amount of data might perform better in this mode, since they will not block on the next command reading their output. Anything that works on non-stream-based data requires this capability as well (e.g., databases or other binary file manipulation tools). To support this mode of operation, append() lets you specify a kind of f, and the pipeline code will create the needed temporary files. The filenames are passed to the shell as $IN and $OUT, so those variable names need to appear in your command string.

import pipes
import tempfile

p = pipes.Template()
p.append('cat $IN > $OUT', 'ff')
p.debug(True)

t = tempfile.NamedTemporaryFile('r')
f = p.open(t.name, 'w')
try:
    f.write('Some text')
finally:
    f.close()

t.seek(0)
print t.read()
t.close()

As you see, several intermediate temporary files are created to hold the input and output of the step.

$ python pipes_file_kind.py
+ trap 'rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W; exit' 1 2 3 13 14 15
+ cat
+ IN=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W
+ OUT=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmp1_h5px
+ cat /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W
+ rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W
trap 'rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W; exit' 1 2 3 13 14 15
cat >/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W
IN=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W; OUT=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmp1_h5px; cat $IN > $OUT
rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpO0tb7W
Some text

And the input and output kind values can be mixed, so that different steps of the pipeline use files or standard I/O as needed.

import pipes
import tempfile

p = pipes.Template()
p.append('cat $IN', 'f-')
p.append('cat - > $OUT', '-f')
p.debug(True)

t = tempfile.NamedTemporaryFile('r')
f = p.open(t.name, 'w')
try:
    f.write('Some text')
finally:
    f.close()

t.seek(0)
print t.read()
t.close()

The trap statements visible in the output here ensure that the temporary files created by the pipeline are cleaned up even if a task fails in the middle or the shell is killed.

$ python pipes_mixed_kinds.py
+ trap 'rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH; exit' 1 2 3 13 14 15
+ cat
+ IN=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH
+ cat /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH
+ OUT=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpmpOMgg
+ cat -
+ rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH
trap 'rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH; exit' 1 2 3 13 14 15
cat >/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH
IN=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH; cat $IN |
{ OUT=/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpmpOMgg; cat - > $OUT; }
rm -f /var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpbvXAdH
Some text

A More Complex Example¶

All of the examples up to this point have been fairly trivial. They were constructed to illustrate how to use pipes.Template() without depending on deep knowledge of shell scripting in general. This example is more complex, and shows how several commands can be combined to manipulate data before bringing it into Python.

My virtualenvwrapper script includes a shell function for listing all of the virtual environments you have created. The function is used for tab-completion and can be called directly to list the environments, in case you forget a name. The heart of that function is a small pipeline that looks in $WORKON_HOME for directories that look like virtual environments (i.e., they have an activate script). That pipeline is:

(cd "$WORKON_HOME"; for f in */bin/activate; do echo $f; done) \
    | sed 's|^\./||' \
    | sed 's|/bin/activate||' \
    | sort

Implemented using pipes, the pipeline looks like:

import pipes
import pprint
import tempfile

p = pipes.Template()
p.append('cd "$WORKON_HOME"; for f in */bin/activate; do echo $f; done', '--')
p.append(r"sed 's|^\./||'", '--')
p.append("sed 's|/bin/activate||'", '--')
p.append('sort', '--')

t = tempfile.NamedTemporaryFile('r')

f = p.open(t.name, 'r')
try:
    sandboxes = [ l.strip() for l in f.readlines() ]
finally:
    f.close()

print 'SANDBOXES:'
pprint.pprint(sandboxes)

Since each sandbox name is written to a separate line, parsing the output is easy:

$ python pipes_multistep.py
SANDBOXES:
['AstronomyPictureOfTheDay',
 'aspell',
 'athensdocket',
 'backups',
 'bartender',
 'billsapp',
 'bpython',
 'cliff',
 'commandlineapp',
 'csvcat',
 'd765e36b407a6270',
 'dh-akanda',
 'dh-betauser-creator',
 'dh-ceilometer',
 'dh-ceilometerclient',
 'dh-keystone',
 'dh-openstackclient',
 'dictprofilearticle',
 'distutils2',
 'docket',
 'docket-pyparsing',
 'dotfiles',
 'dreamhost',
 'dreamhost-lunch-and-learn',
 'emacs_tools',
 'extensions',
 'feedcache',
 'fuzzy',
 'git_tools',
 'hidden_stdlib',
 'ical2org',
 'mytweets',
 'ndn-billing-usage',
 'ndn-datamodels-python',
 'ndn-dhc-dude',
 'ndn-ndn',
 'nose-testconfig',
 'openstack',
 'personal',
 'phonetic-hashing',
 'pinboard_tools',
 'psfblog',
 'psfboard',
 'pyatl',
 'pyatl-readlines',
 'pycon2012',
 'pycon2013-plugins',
 'pycon2013-sphinx',
 'pydotorg',
 'pymotw',
 'pymotw-book',
 'pymotw-ja',
 'python-dev',
 'pywebdav',
 'racemi',
 'racemi_status',
 'reporting_server',
 'rst2blogger',
 'rst2marsedit',
 'sobell-book',
 'sphinxcontrib-bitbucket',
 'sphinxcontrib-fulltoc',
 'sphinxcontrib-spelling',
 'sphinxcontrib-sqltable',
 'stevedore',
 'summerfield-book',
 'svnautobackup',
 'virtualenvwrapper',
 'website',
 'wsme',
 'zenofpy']

Passing Files Through Pipelines¶

If the input to your pipeline already exists in a file on disk, there’s no need to read it into Python simply to pass it to the pipeline. You can use the copy() method to pass the file directly through the pipeline and create an output file for reading.

import pipes
import tempfile

p = pipes.Template()
p.debug(True)
p.append('grep -n tortor $IN', 'f-')

t = tempfile.NamedTemporaryFile('r')

p.copy('lorem.txt', t.name)

t.seek(0)
print t.read()
t.close()

$ python pipes_copy.py
+ IN=lorem.txt
+ grep -n tortor lorem.txt
IN=lorem.txt; grep -n tortor $IN >/var/folders/5q/8gk0wq888xlggz008k8dr7180000hg/T/tmpUxmyd9
3:elementum elit tortor eu quam. Duis tincidunt nisi ut ante. Nulla
6:lacus. Praesent placerat tortor sed nisl. Nunc blandit diam egestas
11:eget velit auctor tortor blandit sollicitudin. Suspendisse imperdiet

Cloning Templates¶

Once you have a pipeline template, you may want to use it multiple times or create variants without re-constructing the entire object. The clone() method makes both of these operations easy. This example constructs a simple word-counter pipeline, then prepends commands to a couple of clones to make it look for different words.

import pipes
import tempfile

count_word_substring = pipes.Template()
#count_word_substring.debug(True)
count_word_substring.append('grep -f - /usr/share/dict/words', '--')
count_word_substring.append('wc -l', '--')

count_py = count_word_substring.clone()
count_py.prepend('echo "py"', '--')
f = count_py.open('/dev/null', 'r')
try:
    print '  "py": %5s' % f.read().strip()
finally:
    f.close()

count_perl = count_word_substring.clone()
count_perl.prepend('echo "perl"', '--')
f = count_perl.open('/dev/null', 'r')
try:
    print '"perl": %5s' % f.read().strip()
finally:
    f.close()

By prepending a custom command to each clone, we can create separate pipelines that perform the same basic function with small variations.

$ python pipes_clone.py
  "py":  1381
"perl":    71